Raised edge with a rubber pad
Sheet metal edge on three sides, with height of 20 mm and loose rubber 3 mm pad.
Wooden board
The 40 mm thick beech board is screwed to the cabinet lid.
Shelf
Zn sheet metal shelf with loading capacity of 50 kg; it is height-adjustable thanks to the perforation of the cabinet walls.
Plinth
Plinth height 100 mm, plinth faces are removable.
Drawer partitioning
Metal dividers
Dividing partitions with grooves along their entire length at 17 mm spacing that correspond to the spacing on the sides of the drawers. The bottom edge of the partitions is provided with holes for attachment to the bottom of the drawers with M5 screws. The partitions are made of high-quality galvanized sheet metal. The dividing plates of the transverse smooth division enable, together with the longitudinal slot division, a variable partitioning of the drawer area.
Plastic troughs
Plastic troughs are manufactured in 9 x 9D layout. The troughs are available in three widths. By connecting the individual troughs, it is possible to form a trough of infinite length, which can be divided as needed by dividers in the spacing of 17 mm. Dividers for troughs can be provided with labels measuring 29 x 12 mm. The troughs are moulded from red (RAL 3020) ABS plastic.
Plastic boxes
Plastic boxes are produced in 9 x 9D layout and three heights. By removable partitions, these boxes can be divided up to four parts. Each compartment can be provided with a label measuring 50 x 14 mm. The design of box bottoms allows for their stacking using fixing mouldings. The boxes are moulded from red (RAL 3020) ABS plastic.
Rubber pad
3 mm thick foam rubber.
What are you interested in
Do you need advice?
